Vacuum Mixer for coatings and plasters
SR 330 ''INmix'' VACUM MIXER
The INmix Mixer provides great in-vacuum paddle-mixing of coatings, plasters and alginates for dental use. Although small and compact, the INmix mixer has an extensive as-standard equipment range (from the digital electronic Timer to the in-built oil-less vacuum pump, and moreover the exclusive mixing speed range from 100 to 500 rpm) which make this device extremely versatile and a must in any dental modern laboratory. The bowls are kept in place by the vacuum created inside which makes the device compact and easy to use.
Standard accessory: medium bowl 500cc.
WALL Version (SR 330 W)
TABLE Version (SR 330 T).
SR 331 Wall Bracket
SR 332 Bench Support
SR 333 Complete small bowl 200cc
SR 334 Complete medium bowl 500cc
SR 335 Complete big bowl 1000cci
SR 360 „SPEEDY MIX“ VACUM MIXER
The SR 360 “SPEEDY-MIX” Mixer for coatings and cast and plasters can perform the entire cycle (paddling, pouring of the coating, vibration) in vacuum conditions. The incorporated vacuum pump is a “Dry pump”, without oil and it’ s entirely maintenance-free.
The paddling is obtained by a gear motor that makes the paddle rotate at a speed varying from 100 to 500 rpm. The machine is supplied with a digital electronic Timer that can be used to set the paddling time. As the pre-set time elapses (shown on the display), the paddling stops and the pouring and vibration can start.
During the pouring of the coating, the vibrator can be turned on and the intensity regulated. All the quantities are visualized by a big LCD Display backlit.. This vacuum paddle and pouring processing assures excellent results, with compact coatings air bubbles and blowholes free.
SR 100 rubber base for cylinders
SR 352 standard bowl for coatings 650cc
SR 354 standard bowl for plasters 650cc
SR 355 lower bowl
SR 356 cover with paddle